Solenoid valve UNI-D
Uni-D Solenoid valve UW 10-50 & US 10-50
PRODUCT INFO
UW -10-50
• UW series is direct, multiplex, connected diaphragm, conductive and normally closed (NC)
2/2 way solenoid valve.
• Able to operate under low pressure
• Applied fluid type : water, air, light oil
• Acceptable for customization Viton (130°C) , Silicone (130°C) and EPDM (130°C) for seal
plug and diaphragmCautions:
Before pipelining, the pipe line must be very clean without any contaminants or impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.US15-50
Product description:
- US series is multiplex, piston guiding, conductive and normally closed (NC)
- 2/2 way solenoid valve.
- Applied fluid type : steam, heavy oil
Cautions:
- 2 Minimum pressure to open: over 0.5~1kgf-cm
- Before pipelining, the pipe line must be very clean without any contaminants or impurity.
- To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
- AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
- It should be installed horizontally; vertical installation is not advisable.
Not Suitalbe For Fluid As Below:
• Liquid status when it is in high temperature; solid status when it is in low temperature.
• Corrosive fluid
• Viscosity over 20cstRead product PDF
Click here to read complete product specifications.